The Smart Electric Spin Scrubber (Model: ECB-K1)

The Smart Electric Spin Scrubber (Model: ECB-K1) is a cordless, rechargeable household power cleaning brush kit designed to eliminate the physical strain of manual scrubbing.

The technical specifications and core operational guidelines for Model ECB-K1 include:

⚙️ Core Technical Specifications

• Operating Speeds: Features dual-speed settings. The low speed runs at 230 RPM to 350 RPM for standard surfaces, while the high-power deep cleaning mode reaches 450 RPM to tackle baked-on grease or thick bathroom soap scum.

• Brush Head Set: Packaged with 8 interchangeable brush heads (including a corner brush, flat scrub brushes, dome brushes, and soft sponge/polishing pads) to address different shapes, grout lines, and delicate surfaces.

• Handle Assembly: Equipped with an adjustable, detachable extension rod that expands the handle length from 69 cm to 103 cm to help reach high tiles or clean floors comfortably.

• Water Resistance: The lower brush attachment spindle is waterproof, allowing you to immerse the brush head underwater briefly during cleaning. The handle body above the telescopic release button is only splash-proof and should never be fully submerged.

🔋 Charging Instructions

• Charging Interface: Charged via a USB to Type-C cable plugged into the port hidden on the back of the handle.

• Waterproof Seal: Always ensure the silicone charging port door is pressed completely closed before exposing the device to any water.

• Indicator Status: The built-in LED indicators will flash white during charging and stay lit solid once the internal battery is fully powered.

• Note: For safety and circuit protection, the scrubber will not turn on while the power cable is actively plugged in.

💡 Quick Troubleshooting & Maintenance

• Automatic Shutoff: The ECB-K1 includes an automatic motor block safety system. If you apply excessive downward pressure that jams the rotation shaft, it will shut down to protect its internal metal gears. Simply lift the brush and turn the power switch back on to resume.

• Swapping Brush Heads: The attachments use a push-to-snap interface. To securely pull a head off, grab the brush attachment firmly while stabilizing the main body base and pull straight away rather than twisting loosely.